R30 Series
DPDT, 10 Amp, AC & DC Adjustable Interval Time Delay Relays
|
Features
±0.1% Repeatability
8-Pin octal base
Knob with calibrated scale
3-timing ranges
Impact proof dust cover
IC hybrid circuitry for timing
|
INTERVAL ON - The relay will operate immediately when the input voltage is applied. At the end of an adjustable interval the relay will release and remain in this state until re-application of the input voltage.
Electrical Characteristics
Contact
Contact Rating: 10 Amps 120 VAC, 30 VDC-8 Amp, 1/2 HP @ 240 VAC,
1/3 HP @ 120 VAC
Life: 500,000 operations @ 120 VAC, 10A resistive
1,000,000 operations @ 120 VAC, 5A resistive
2,000,000 operations @ 120 VAC, 2A resistive
Mechanical Life: 50,000,000 operations
Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart
Timing
Timing Adjustment Modes Available:
0.1 to 10 sec (K-suffix)
1.0 to 180 sec (L-suffix)
2.0 to 300 sec (M-suffix)
Repeat Accuracy
±0.1% - constant voltage & temperature
Percent Timing Range over Temperature & Voltage Range: ±10%
Timing Tolerance at High End of Range: -0, +40%
Timing Tolerance at Low End of Range: +0, -40%
Reset Time: 100mS Max
Protection
Transient: UL508 surge test 5000V for 50mS
Dielectric Breakdown:
Coil To Contact: 1500 VAC
Across Open Contact: 1000 VAC
Noise Immunity: NEMA ICS 2-230 2500 VAC
Environmental Characteristics
Operating: -20°C to +55°C
Storage: -55°C to +85°C
Weight
Std: 4 ozs. (115 grams) - approx
Back to Top
Dimensional Drawings
D16
Contact Arrangment
DPDT, 2 Form "C" |
Timing |
Back to Top
Part Numbers
ACCESSORIES |
Mounting Styles |
Description |
NTE Type No. |
Surface Mount |
8-Pin Octal |
R95-101 |
Panel Mount |
8-Pin Octal |
R95-118 |
DIN Rail
Mount |
8-Pin Octal |
R95-113 |
8-Pin Octal |
R95-181 |
Back to Top
|