Features 16 Time Ranges in a Single Timer User Sets Time Ranges (No Math - Just Flip Switches Instructions right on Unit Fine Tune Knob for Precision Timing Pin for Pin Interchangable with Timers in the Field - No Rewiring AC or DC Operation CMOS Digital Circuitry - 0.5% Repeatable Accuracy

INTERVAL ON - The relay energizes and timing begins when the input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying the input voltage.

Electrical Characteristics

Contact
Contact Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC, Pilot Duty 345VA, 120VAC or 240VAC, 50/60Hz
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load

Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart

Timing
Timing Adjustment Modes Available: See Timing Range Chart

Repeat Accuracy
±0.5% - after established at steady temperature (4 hours)
Timing Tolerance at High End of Range: -0, +10%
Timing Tolerance at Low End of Range: +0, -50%

Reset Time: 60mS Typ

Protection
Transient: Surge Test 10,000V for 20mS
Dielectric Breakdown:
     Coil To Contact: 1850 VAC
     Across Open Contact: 1850 VAC

Environmental Characteristics
Operating: -20°C to +55°C

Weight
Std: 4.5 ozs. (130 grams) - approx

Back to Top

Dimensional Drawings

D35                                              Timing Range Chart
Contact Arrangment

DPDT, 2 Form "C"

Timing

Back to Top

Part Numbers

AC or DC OPERATED
NTE Type No.	Nom. Volt.	Contact Arr.	Input Cur. Nom.	Max. Contact Cur, @ 28VDC or 120VAC	Diag. No.
R63-11AD10-12	12VAC/DC	DPDT	167mA	10A	D35
R63-11AD10-24	24VAC/DC	DPDT	83mA	10A	D35
R63-11AD10-120	120VAC/DC	DPDT	17mA	10A	D35

ACCESSORIES
Mounting Styles	Description	NTE Type No.
Surface Mount	8-Pin Octal	R95-101
Panel Mount	8-Pin Octal	R95-118
DIN Rail Mount	8-Pin Octal	R95-113
	8-Pin Octal	R95-181

Back to Top