Meltric DSN 150Amp Metal Decontractor Series Switch Rated Inlet (Male)

[ Back to Meltric Main Page ]    [ DSN Series ]

DSN 150Amp Metal Decontractor Series Acrobat Spec		Rating Voltage 600 VAC Switch Rating (AC Only) Branch Circuit & Motor Circuit Disconnect Switching Horsepower Ratings 1Ø 7 1/2 hp 1Ø 20 hp 3Ø 30 hp 3Ø 30 hp 3Ø 75 hp 3Ø 75 hp Short Circuit Rating 100kA Close & Withstand Testing was performed with RK1 current limiting fuses sized at 400% of the highest full load motor ampacity associated with the devices hp rating. 10kA Close & Withstand Testing was performed with 400A RK1 non-time delay Mersen fuses. Environmental Ratings NEMA 4X, IP66+IP67 Temperature Range Min -40°F/Max 140°F* Contact SRI for temps below -15°F. Wiring Capacity in 4 AWG Max 2/0 AWG Aux Contacts - Max 14 AWG Listings UL, CSA, IEC, CE* * Contact SRI
Click on the Part Number for more details or to purchase. For Part with Suffix, View the Option Section at the bottom of the page

Part Numbers Voltage Polarity Mate 69-98167 3P+N+G+ 69-94167 69-98076 2P+N+G 69-94076 69-98075 1P+N+G 69-94075 69-98162 2P+G 69-94162 69-98163 3P+G 69-94163 69-98072 2P+G 69-94072 69-98073 3P+G 69-94073 69-98047 3P+N+G+ 69-94047 69-98045 1P+N+G 69-94045 69-98147 3P+N+G+ 69-94147 69-98042 2P+G 69-94042 69-98043 3P+G 69-94043 69-98142 2P+G 69-94142 69-98143 3P+G 69-94143 Other voltage configurations are available - Call toll free - 1-800-356-0259 Don't forget to add installation accessories to your order which you will see on the detailed page of the link you click on of view this pdf here Optional Add-ons Inlet Options Suffix # With 2 Auxiliary/Pilot Contacts Inlet # - 262 With 3 Auxiliary/Pilot Contacts Inlet # - 263 With 4 Auxiliary/Pilot Contacts Inlet # - 264 With 5 Auxiliary/Pilot Contacts Inlet # - 975 With 6 Auxiliary/Pilot Contacts Inlet # - 976 Self-Ejecting Plug Release Inlet # - 338 With No Lockout Hole Inlet # - A155 For Auxiliary Switch* Inlet # - NNF Notes: + Not UL/CSA Listed Notes: * Order inlet with P+N+G configuration and receptacle with P+G configuration For complete Options available for this series, Please review the options Pdf here **Specifications subject to changes** [ Back to Meltric Main Page ]    [ DSN Series ]