Monday, May 16, 2022     
     Serving the Electronic Industries for Over 33 Years
Viking Multi-Pins plugs receptacles Logo
Nte Relays, Capacitors, Resistors, & Pot Trims logo
E-Lab Semiconductors logo
Molex Connectors Logo
     Electronic Components Distributor Logo                        
 Home
  |  View Account   |    Engineer's Corner    |  Contact Us  |  Cross Reference  |  Line Card  |  0 Item
Part Search
NTE Cross Ref. Search
Login
SRI Live Chat Help
call us email us contact us

Product Links

Inside SRI

About SRI
Contact Us
Careers
Link to Us!
Feedback

SRI-Newsletter
Subscribe to our newsletter to receive monthly specials, manufacturer's feature, and electronics news via email.

See Our latest release of SRI-Newsletter here

View Our List of Archived Newsletter Articles


SRI Links

Visit our Sister Site,

Distributor of

Industrial Products

  Web Search ..
  Powered by;

Surge Supressors Explained

A power surge, or transient voltage, is an increase in voltage significantly above the designated level in a flow of electricity. In normal household and office wiring in the United States, the standard voltage is 120 volts. If the voltage rises above 120 volts, a problem exists, and a surge protector helps to prevent that problem from destroying your computer. Even if increased voltage doesn't immediately break your machine, it may put extra strain on the components, wearing them down over time. A standard surge protector passes the electrical current along from the outlet to a number of electrical and electronic devices plugged into the power strip. If the voltage from the outlet surges or spikes -- rises above the accepted level -- the surge protector diverts the extra electricity into the outlet's grounding wire.

Usually a varistor, also known as an MOV, connects the power line to the ground. When the voltage spikes, these varistors allow the current to run to the ground and dissipate the surge. When current returns to normal, the varistors have higher resistance that prevent normal current from traveling to the ground. Another method uses a gas tube in a similar parallel circuit to perform the same job as the varistor.


Some surge products use a series circuit design instead. Basically, these suppressors detect the higher voltage, store the extra energy in a series of capacitors, and release it gradually to the neutral line when the current returns to its normal state. The idea is to prevent the electricity from traveling to the ground line and possibly disrupting the building's electrical system.

Surge suppressors can’t be completely relied upon during lightning storms because of the tremendous surge in current. The safest solution would be to unplug the device. Lightning is not the most common cause for surges, though. Surprisingly, high-power electrical devices, such as elevators, air conditioners and refrigerators are usually the culprit for surges because of the demand placed on the system turning on and off components like compressors and motors in these appliances.

Whole House Surge Protectors


Panel Mount Surge Surpressors, commonly refrerred to as Whole House Surge Protectors, are used to protect household items such as refrigerators, freezers, washers, dryers, dishwashers, trash compactors, air conditioners, garbage disposals, and electric stoves. Because most of the surges from your home and office are from these devices turning on/off, surge supressors like these are cost effective. They are the first stage, heavy-duty filter for power line disturbances. These units are installed at the electrical service entry of the building by a licensed electrician and often provide a warranty for the appliances connected. While panel mount surge suppression is the first stage of protection, plug-in surge units and Uninterruptable Power Supplies (UPS) are recommend as a second and third stage of surge protection for electronic components.


Plug-in Surge Protectors


Plug-in Surge Supressors, or Protectors, are an important second line of defense in a surge system. All sensitive electronic equipment should be protected using these devices. Power strips are not surge protectors. To check, look at the writing on the device - if it is a surge supressor, it will say so. Plug-in surge supressors have parts like MOV's that wear out over time, they usually have an indicator light for when a unit needs to be replaced.

UPS Backup


Uninterruptable Power Supplies are used to both condition power and to prevent sudden loss of power to connected equipment. They can be used for anything from a single PC to an entire data center. An ordinary UPS WILL give you a high level of protection, but you should still use a surge protector. A UPS will stop most surges from reaching your computer, but it will probably suffer severe damage itself. It's a good idea to use a basic surge protector, if just to save your UPS.



Surge Standards

  • IEEE (The Institute of Electrical and Electronic Engineers) states that 6000V is the largest transient that the interior of a building would experience.
  • IEEE defines its harshest interior surge environment as one that could experience 100 surges of 6000V, 3000A in a years time (category B3).
  • A new federal guideline recommends that a surge protector utilized in a harsh environment should be capable of withstanding 1000 surges of 6000V, 3000A or ten years worth of IEEE’s category B3.
  • UL (Underwriters Laboratories) now provides a new adjunct testing service (in addition to the 1449 safety classification) that will test surge protectors to the 1000 surge, 6000V, 3000A federal protocol.

Be sure that the product is listed as a transient voltage surge suppressor. This means that it meets the criteria for UL 1449, UL's minimum performance standard for surge suppressors. A lower clamping voltage indicates better protection. There are three levels of protection in the UL rating -- 330 V, 400 V and 500 V. Generally, a clamping voltage more than 400 V is too high. A higher number for energy absorption indicates greater protection. Look for a protector that is at least rated at 200 to 400 joules. For better protection, look for a rating of 600 joules or more. Also, make sure the surge suppressor has a response time of less than 1 nanosecond.

Sources:
http://computer.howstuffworks.com/surge-protector.htm
http://en.wikipedia.org/wiki/Surge_protector
http://www.extremetech.com/article2/0,1697,1155241,00.asp
http://www.sycomsurge.com/
http://www.ditekcorp.com/


**Specifications subject to changes**




overstock and special low priced items, prices while supply lasted


Product Spotlight
S150RLS
S150RLS - 0.2 Watts Round Metal Frame Speaker, Rare Earth, 38 x 8.0 mm
0.2 Watts Round Metal Frame Speaker, Rare Earth, 38 x 8.0 mm
$6.09 MORE INFO
More Intervox

W28-XT1A-15
W28-XT1A-15 - Snap-in mounting, Push-to-reset Circuit Breaker Relay
Snap-in mounting, Push-to-reset Circuit Breaker Relay
$0.00 MORE INFO

BRP2211P-12-CS
BRP2211P-12-CS - Piezo Electtrics with internal Circuitry @ 30cm dB- 12VDC - 4000Hz - Circuit, Pins
Piezo Electtrics with internal Circuitry @ 30cm dB- 12VDC - 4000Hz - Circuit, Pins
$2.12 MORE INFO
More Intervox

CR2450N
CR2450N - 3 Volts, 24.5 x 5.0 mm, 540 mAhLithium Coin Cell Battery
3 Volts, 24.5 x 5.0 mm, 540 mAhLithium Coin Cell Battery
$1.94 MORE INFO
More Renata

BH325PC
BH325PC - Two AA Size Battery Holders
Two AA Size Battery Holders
$0.78 MORE INFO
More Frontline Battery Holders


Sponsored Ads