Potentiometer - 1/2 Watt, 1/8" dia. shaft

Features Hot molded carbon element One piece housing and bushing Stainless steel shaft Meets or exceeds specifications of MIL-R-94-QPL Listed Specifications Resistance Range - Linear Taper: 100 Ohms to 1M Ohms Resistance Tolerance: ±10% Power Rating: 1/2W @ +70°C derated to 0W @ +120°C Insulation Resistance: 10K Meg Ohms (Dry) Insulation Resistance: 100K Meg Ohms (Wet) Dielectric Strength: 750V RMS at sea level Operating Voltage: 350V subject to power rating Mechanical Rotation: 295° Operating Torque: 0.5 oz/in to 6 oz/in Rotation Life: 25,000 cycles <Operating Temperature: -65° to +125°C Resistance to Solder Heat: +350°C for 5 seconds Load Life: 1000 hr. at +70°C

Potentiometer - 1/2 Watt, 1/8" dia. shaft Parts

NTE Part No.	Military No.	Value Ohms	Shaft Length	Diag. No.
501-0085	RV6NAYSD101A	100	7/8"	P4
501-0086	RV6NAYSD251A	250	7/8"	P4
501-0087	RV6NAYSD501A	500	7/8"	P4
501-0088	RV6NAYSD102A	1K	7/8"	P4
501-0089	RV6NAYSD252A	2.5K	7/8"	P4
501-0090	RV6NAYSD502A	5K	7/8"	P4
501-0091	RV6NAYSD103A	10K	7/8"	P4
501-0092	RV6NAYSD253A	25K	7/8"	P4
501-0093	RV6NAYSD503A	50K	7/8"	P4
501-0094	RV6NAYSD104A	100K	7/8"	P4
501-0095	RV6NAYSD254A	250K	7/8"	P4
501-0096	RV6NAYSD504A	500K	7/8"	P4
501-0097	RV6NAYSD105A	1M	7/8"	P4

Potentiometer - 1/2 Watt, 1/8" dia. shaft Dimensional Drawing

P4

Back to Top