Features SPDT, DPDT, & 3PDT Models Solder terminals High dielectric strength Multi-pole switching

Electrical Characteristics Contact
Contact Rating:

Poles	120VAC	240VAC	28VDC
SPDT	12A (1/3 HP)	12A (1/2 HP)	10A
DPDT	12A (1/3 HP)	8A (1/2 HP)	10A
3PDT	10A (1/3 HP)	6A (1/2 HP)	10A

Contact Material: 3/16" Silver cadmium oxide
Contact Resistance: 0.050 ohms max initial

Coil
Coil Voltages: See Chart
Pick-up Voltages:
             80% of nominal or less, AC or DC
Resistance: See chart
Min Sensitivity: 125mW per value
Duty Cycle: Continuous

Operational Characteristics
Timing Values (At nominal coil voltage):
             Operate Time: 25mS or less
             Release Time: 20mS or less

Insulation Characteristics
Dielectric Strength:
             Contact to Coil: 1500 VRMS
             Across Open Contacts: 1000 VRMS
             Pole to Pole: 1500 VRMS
             Contacts to Frame: 1500 VRMS
Insulation Material: Molded polyester
Insulation Resistance: 1 x 10³ megohms min

Environmental Characteristics
Operating: -10°C to +50°C (AC)
Operating: -10°C to +60°C (DC)
Non-operating (storage): -30°C to +105°C

Weight
Std: 2.8 ozs. (70.9 grams) - typical

Back to Top

Dimensional Drawings

D6

Back to Top

Contact Arrangment
(Viewed from Terminal End)

A (SPDT), 1 Form "C"

B (DPDT), 2 Form "C"

C (3PDT), 3 Form "C"