Potentiometer - 1 Watt, 7/8" round case, 1/4" dia. shaft, single turn

Features Compact size Stainless steel 1/4" diameter shaft Turret type, solder plated terminals Plastic housing with non-turn pin Specifications Electrical Resistance Range - Linear Taper: 1K Ohms to 50K Ohms Resistance Tolerance: ±20% Power Rating: 1W @ +70°C derated to 0W @ +125°C Temperature Coefficient of Resistance: ±600ppM/°C Linearity Tolerance: ±2% independent Output Smoothness: 0.1% max Insulation Resistance: 1000 Meg Ohm min, 500VDC Dielectric Strength: 1000V RMS min 50Hz End Voltage: 0.5% max Electrical Travel: 340° ±3° Rotation Life: 2,000,000 shaft revolutions Mechanical Bearing Type Bushing: Sleeve bearing Resistance Element: Conductive plastic Mechanical Rotation: 360° (Continuous), 340° ±3° (With Stops) Starting and Running Torque: 3.68mNm (0.5 oz in) Shaft Tolerance: 0.13 mm (Runout) Shaft Tolerance: 0.25 mm (End Play) Shaft Tolerance: 0.13 mm (Radial Play) Rotation Life: 10,000,000 shaft revolutions Environmental Operating Temperature: -55° to +125°C Load Life: 1000 hr.

Potentiometer - 1 Watt, 7/8" round case, 1/4" dia. shaft, single turn Parts

NTE Part No.	Value Ohms	Shaft Length	Diag. No.
502-0080*	1K	7/8"	P11
502-0087**	1K	7/8"	P11
502-0081*	2K	7/8"	P11
502-0088**	2K	7/8"	P11
502-0082*	5K	7/8"	P11
502-0089**	5K	7/8"	P11
502-0083*	10K	7/8"	P11
502-0090**	10K	7/8"	P11
502-0084*	20K	7/8"	P11
502-0091**	20K	7/8"	P11
502-0085*	50K	7/8"	P11
502-0092**	50K	7/8"	P11

* NOTE: These types are continuous rotation
** NOTE: These types contain rotation stops

Potentiometer - 1 Watt, 7/8" round case, 1/4" dia. shaft, single turn Dimensional Drawing

P11

Back to Top