Smoke Extraction Soldering Products / Heat Guns

493-10	BENCH TOP SMOKE ABSORBER Breathe easy. The 493 bench top smoke absorber removes soldering smoke and fumes quickly, safely and efficiently. unit is made of non-sloughing static dissipative conductive material and operates quietly — only 44dBA at 2 meters with 37 cubic feet per minute airflow standard activated carbon filter (PN: A1001) absorbs up to 80 percent of the odors from the air and is easy to replace ESD-safe by design	Hakko
HJ3100	FUME AND SMOKE EXTRACTION SYSTEM The HJ3100 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. (Shown above: Loc-Line hose with rectangular hood sold separately. See Accessories for details.) The HJ3100 is a high-mass flow, low vacuum system. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the HJ3100 unit by flexible or rigid ducts. Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the HJ3100 is located. The pre-filter is made of a treated polyester material that removes coarse particles, such as dust, thus extending the life of the main HEPA filter. The HEPA (High Efficiency Particulate Air) filter consists of a pleated fiberglass paper medium, providing the greatest amount of surface area within the volume of the filter case. The standard filters used in the HAKKO HJ3000-series fume extractors contain an activated carbon element built into the filter. This filter is designed to last the life of the main HEPA filter. Carbon filters have absorption ratings of 80-85%. Efficiencies of the various HEPA/carbon filters for the HJ3100 are greater than 98% at 0.3 microns. All tests per the DOP test as stipulated in MIL-STD-282.	Hakko
HJ3100-02	FUME AND SMOKE EXTRACTION SYSTEM The HJ3100 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. The HJ3100 is a high-mass flow, low vacuum system. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the HJ3100 unit by flexible or rigid ducts. Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the HJ3100 is located. The pre-filter is made of a treated polyester material that removes coarse particles, such as dust, thus extending the life of the main HEPA filter. The HEPA (High Efficiency Particulate Air) filter consists of a pleated fiberglass paper medium, providing the greatest amount of surface area within the volume of the filter case. The standard filters used in the HAKKO HJ3000-series fume extractors contain an activatedcarbon element built into the filter. This filter is designed to last the life of the mainHEPA filter. Carbon filters have absorption ratings of 80-85%. Efficiencies of the various HEPA/carbon filters for the HJ3100 are greater than 98% at 0.3microns. All tests per the DOP test as stipulated in MIL-STD-282. Setup includes: HJ3100 unit (1 pc) 999-138 hood (2 pcs) 999-189 hose (2 pcs) 999-169 3" clamp set	Hakko	Sorry, Photo Is Not Available
HJ3100-03	FUME AND SMOKE EXTRACTION SYSTEM, 230V Unit Only The HJ3100 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. The HJ3100 is a high-mass flow, low vacuum system. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the HJ3100 unit by flexible or rigid ducts. Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the HJ3100 is located. The pre-filter is made of a treated polyester material that removes coarse particles, such as dust, thus extending the life of the main HEPA filter. The HEPA (High Efficiency Particulate Air) filter consists of a pleated fiberglass paper medium, providing the greatest amount of surface area within the volume of the filter case. The standard filters used in the HAKKO HJ3000-series fume extractors contain an activatedcarbon element built into the filter. This filter is designed to last the life of the mainHEPA filter. Carbon filters have absorption ratings of 80-85%. Efficiencies of the various HEPA/carbon filters for the HJ3100 are greater than 98% at 0.3microns. All tests per the DOP test as stipulated in MIL-STD-282.	Hakko
HJ3100-05	FUME AND SMOKE EXTRACTION SYSTEM, 230V Unit Only The HJ3100 fume extraction unit is designed expressly for use at soldering stations, extracting the contaminated air directly at the source. The HJ3100 is a high-mass flow, low vacuum system. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods, and transferred to the HJ3100 unit by flexible or rigid ducts. Inside the unit, two filters, comprising three stages of filtering, remove the contaminants from the air. The purified air is then returned to the area where the HJ3100 is located. The pre-filter is made of a treated polyester material that removes coarse particles, such as dust, thus extending the life of the main HEPA filter. The HEPA (High Efficiency Particulate Air) filter consists of a pleated fiberglass paper medium, providing the greatest amount of surface area within the volume of the filter case. The standard filters used in the HAKKO HJ3000-series fume extractors contain an activatedcarbon element built into the filter. This filter is designed to last the life of the mainHEPA filter. Carbon filters have absorption ratings of 80-85%. Efficiencies of the various HEPA/carbon filters for the HJ3100 are greater than 98% at 0.3microns. All tests per the DOP test as stipulated in MIL-STD-282. System includes 4-port cover.	Hakko	Sorry, Photo Is Not Available
Results Displayed 1 - 5 of 5

ECG / NTE Soldering Irons, Butane Torch, Soldering Gun, De-soldering Irons, And Soldering Accessories Eclipse Tools Soldering Stations, Iron Holders, Soldering Irons and Soldering Accessories Hakko Soldering Stations, Desoldering Stations, Iron Holders, Stick Irons & Hot Tweezers, Rework Station, Smoke and Fume Extraction Equipments, Testers, and Soldering Accessories Kester / NTE Soldering Wire, Soldering Wicks, Soldering Mask, Adhesive, Soldering Chemicals, Flux and Thinners Plato Plato manufactures replacement soldering and desoldering tips to fit Weller/Ungar, Pace, Hakko, Hexacon, Ungar, OK Industries, Antex, Oryx, Esico, American Beauty, Bonkote, Ersa, Xytronics, Elvo and many other popular soldering and desoldering irons. Sunkko Maintenance Station, Hot blast Welding Remover, Soldering Station & Soldering Iron, Attracting Gun, Pre-heater Station, Smoke Exhaust, Solder Iron Thermometer, Cleaning Machine, Nozzle & Soldering Tip, and Iron Holder & Accessories Velleman Soldering Accessories, Cordless Soldering Bits, Cordless Soldering Tools, DeSoldering Accessories, DeSoldering Tools Xytronic Soldering Stations, Desoldering Stations, Iron Holders, Stick Irons & Hot Tweezers, Rework Station, Smoke and Fume Extraction Equipments, and Soldering Accessories