Meltric Benefits

Code Compliance

NEC
The NEC requires motors to have readily accessible “line of sight” disconnects that are either an approved switch or a properly rated plug and receptacle. With their unique ability to withstand high in-rush currents, Meltric Decontactor™ Series plugs and receptacles are the perfect choice for the line of sight disconnect required on motors and other inductive loads. DS, DSN and DB Decontactors are horsepower rated and pass testing at the 6xFLA current level required relative to locked rotor conditions.
NFPA 70E
NFPA 70E requires that any person working near live parts must wear protective clothing and equipment based on the calculated incident energy exposure level or alternatively on NFPA’s listed minimum requirements.   Once installed, Meltric Decontactor Series plugs and receptacles simplify compliance to NFPA 70E requirements. Their dead front construction eliminates the possibility of access to live parts so there is no need to don personal protective equipment when changing out motor or other equipment connected with Meltric Decontactors. Visit the NFPA website to read more about NFPA 70E
UL/CSA Listings
Meltric Decontactors are the world's only UL and CSA switch rated plugs and receptacles. Not only do they meet performance test requirements for UL 1682/CSA C22.2 No.182.1 (to which competitive pin and sleeve devices are listed), but Decontactors also meet performance test requirements for products listed to UL Subject 2682 "Switch-Rated Plugs and Receptacles", as well as, CSA C22.2 No.4 "Enclosed and Dead Front Switches" and CSA C22.2 No.14 "Industrial Control Equipment." They are approved by UL and CSA for use in motor circuit disconnect/switching applications and in branch circuit disconnect/switching applications. •       50 operations @ 6x motor FLA .4-.5 power factor •       6000 operations @ FLA .75-.8 power factor •       4000 mechanical operations (10,000 total operations) •       Short circuit make and withstand @ 65kA, 600V and .4-.5 power factor Additional Listings include:  IEC/EN 60309-1, 60947-3, AS 3123